Style 840 Woven Wire Tool Cribs
Build tool cribs of any size and configuration with WireCrafters Style 840 Partition System. Construct walls and ceilings from same modular sized panels. Stack panels to desired wall height and bolt to posts using standard hand tools. Full line of hinged, double hinged, and sliding doors available. Open but secure design allows free circulation of light, HVAC, and fire suppression systems throughout secured areas. Call one of our Sales professionals for a free consultation about your needs.

Features

Twenty standard sized panels 4' 0" or 5' 0" high by 1' 0" to 10' 0" wide.
Stack two or more panels between posts to reach wall height.
Standard size panels work in ceilings and walls.
Custom size panels and special heights available.
Hinged, double hinged, sliding, and vertical rise doors available.
Sliding doors have patented tamper resistant latch mechanism.
Angle frame design gives installer clear access to hardware, speeding installation.
Assembly hardware is inaccessible from the secured side of the partition.
Standard 3/8" mounting hardware is the heaviest in the industry.
Heavy duty options available.
Panels may be ordered with any mesh, expanded metal, sheet metal, or clear Lexan.

Panels Shall be 10gauge steel wire crimped and woven in to 2" x 1" opening rectangular mesh, securely welded into a frame of 1-1/4" x 1-1/4" x 1/8" steel angle factory punched with 7/8" x 7/16" slotted holes to accept 3/8" mounting hardware. Panels four to six feet wide shall have one 1/4" x 3/4" flat stiffener, wider panels receive two 1/4" x 3/4" stiffeners. All panels shall be fastened to posts with 3/8" x 3" plated bolts and nuts.
Doors - Hinged shall be constructed of the same materials as the panels with two 1/4" x 3/4" horizontal stiffeners across the width, and two diagonal 1/4" x 3/4" stiffeners from center to the corner. Hinged doors shall be equipped with padlock lugs (cylinder lock optional), three 4" x 4" spun pin hinges, and pick plate/slam bar assembly.
Doors - Sliding shall be constructed of the same materials as the panels with two 1/4" x 3/4" horizontal stiffeners across the width, and two vertical 1/4" x 3/4" stiffeners from center to top or bottom. Sliding doors shall be equipped with two 4 wheel trolley trucks, 1-7/8" x 2-3/8" door track, pad lock lugs (cylinder lock optional), and door keeper assembly.
Posts Shall be made of 2" x 2" x 14 gauge steel tubing. Base plates of 2" x 7" x 1/4" steel flat with two 7/16" round holes for anchoring, shall be welded to each tube. Posts are factory drilled with 1/2" holes to accept hardware for mounting panels.
Hardware Shall be 3/8" standard thread grade two plated nuts and bolts. Floor anchors are 3/8" wedge type-provided.
Finish Non-plated parts receive one coat of gray acrylic enamel. Touch up paint included with each shipment.