Style 840 Woven Wire Physical Barriers
Wire Partitions from WireCrafters are a simple, effective way to protect personnel from the dangers posed by automated equipment. These barriers are a strong, reliable, and economical solution to plant safety needs. System versatility allows easy integration of access doors or material handling openings with system controls. Unlike hi-tech devices, this guard is always on duty, unaffected by power outages or electrical problems. Also doubles as a potential safety net by containing objects ejected by a malfunctioning robot. Crimped and woven wire mesh is resilient; resists dings, retains its shape, and looks better longer.

Interlocks
WireCrafters can supply your barrier with Fortress® electrical interlocks or mounting plates for your own control system. Please specify your preference when placing your order. See details and offerings on our Electrical Interlocks page.

Features

Twenty standard sized panels; 4' 0" or 5' 0" high by 1' 0" to 10' 0" wide.
Panels install horizontally between posts.
Barrier may be built to any height, use single panel or stacking multiple panels.
Welding curtain sized to fit panels are available.
Hinged, double hinged, sliding, and vertical rise gates available.
Simple bolt up assembly, easy to remove for maintenance access.
Lift out panel openings available.
Automotive standard barrier available.
Custom sizes, heavy duty options available.
Electrical interlock available per your specification.
Panels may be ordered with any mesh, expanded metal, sheet metal, or clear Lexan.

Panels Shall be 10gauge steel wire crimped and woven in to 2" x 1" opening rectangular mesh, securely welded into a frame of 1-1/4" x 1-1/4" x 1/8" steel angle factory punched with 7/8" x 7/16" slotted holes to accept 3/8" mounting hardware. Panels four to six feet wide shall have one 1/4" x 3/4" flat stiffener, wider panels receive two 1/4" x 3/4" stiffeners. All panels shall be fastened to posts with 3/8" x 3" plated bolts and nuts.
Doors - Hinged shall be constructed of the same materials as the panels with two 1/4" x 3/4" horizontal stiffeners across the width, and two diagonal 1/4" x 3/4" stiffeners from center to the corner. Hinged doors shall be equipped with padlock lugs (cylinder lock optional), three 4" x 4" spun pin hinges, and pick plate/slam bar assembly.
Doors - Sliding shall be constructed of the same materials as the panels with two 1/4" x 3/4" horizontal stiffeners across the width, and two vertical 1/4" x 3/4" stiffeners from center to top or bottom. Sliding doors shall be equipped with two 4 wheel trolley trucks, 1-7/8" x 2-3/8" door track, pad lock lugs (cylinder lock optional), and door keeper assembly.
Posts Shall be made of 2" x 2" x 14 gauge steel tubing. Base plates of 2" x 7" x 1/4" steel flat with two 7/16" round holes for anchoring, shall be welded to each tube. Posts are factory drilled with 1/2" holes to accept hardware for mounting panels.
Hardware Shall be 3/8" standard thread grade two plated nuts and bolts. Floor anchors are 3/8" wedge type-provided.
Finish Non-plated parts receive one coat of gray acrylic enamel. Touch up paint included with each shipment.